Niutech’s continuous pyrolysis plant is working under safety and environmental protection and will convert the waste tires to 45-50% fuel oil, 32-36% carbon black, 12-15% steel and 6-8% combustible gas (recycling use to the system after scrubbing). All those outputs are able to be upgraded by further processing.
In order to keep an even heating temperature, the heating source is connected to the pyrolysis system through the combustor, while the reactor is heated by hot air to prolong the life of the reaction kettle of the automatic continuous waste tyre pyrolysis plant.
Beston waste tyre pyrolysis oil plant employs the most advanced green pyrolysis technology to maximize the scrap tires into value, such as fuel oil. The pyrolysis oil from tires is a synthetic fuel under investigation as a substitute for petroleum. Besides, you can also get carbon black and steel wire through our waste tire to oil plant.
Waste tire pyrolysis machine can successfully process used tyres into fuel oil, carbon black and steel wire by high temperature pyrolysis, without generating any pollutant. The tire pyrolysis equipment produced by Beston Machinery always pays more attentions to the environmental protection system, which mainly can be expressed from four
e. Continuous feeding, discharging and oil generating. The continuous plant can achieve continuous feeding, discharging and oil generating in high temperature condition, and it also doesn’t return oil smoke. The feeder has special gas seal device, which is suitable for large-scale industrial continuous operation. f. Energy saving
The scrap tire is shredded into proper tire chips and continuously to be fed into the reactor for the normal pressure low temperature pyrolysis together with the low temperature sulfur transfer catalyst through the hot sealed device.
The waste tires and catalysts are delivered into the reactor, then cracked under the anaerobic, normal pressure and airtight conditions. The final products of waste tire pyrolysis plant include fuel oil, carbon black, steel wire and a little non-condensable gas. Here are the main components of waste tire pyrolysis plant: Feeding System
Beston waste pyrolysis plant for sale is a kind of environmental project, which can be used for dealing with waste plastic, tyre, rubber, oil sludge, etc.
Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time. 5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices . 6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.
1. The source material is continuously fed into pyrolysis chamber: Paste and solid waste is fed by screw conveyor from the hopper. Liquid waste is fed from the receiver tank by the pump. 2. The pyrolysis chamber is heated to the operating temperature by the mixed fuel burner installed in furnace. 3.
Waste tyre pyrolysis plant from Beston can process 6 to 24 tons per day, including During these years, Beston has helped many customers with their tyre In addition, we also use automatic feeder in charcoal machine and waste sorting plant. 2. Compared to the continuous scrap tyre pyrolysis plant, the small and
Waste tyre pyrolysis plant with capacity 6-24T/D makes fuel oil from waste tyre in Turkey. Some technology can effectively convert some waste into new use or reduce the pollution. The continuous machine adopts modular design. It makes . If you have other requirement about pyrolysis tyre plant, consult us right now.
And we are looking forward to co-operating with more customers with the top Waste Tyre Pyrolysis Plant In the UK Under Construction Meanwhile, the continuous heating can speed up the pyrolysis process to get a higher oil yield. . The whole working process runs under the condition of no odors, no smoke, and it has
Jan 15, 2018 A complete set of continuous waste tyre pyrolysis plant is mainly of many parts, they work together to ensure the normal operation of the plant. mm rubber pieces by pre-treatment equipment to meet the requirement formation of oil products such as petrol, diesel with high benefits. . Scroll back to top.
The Industrial Continuous Scrap Tire/Waste Plastic Pyrolysis Production Line is worldwide unique production line that is able to operate in a stable condition for a protection test in full compliance with EU environmental protection standards. of top ten priority project of circulating economy in Binzhou City, the waste tire
were published recently in China concerning the utilization of the waste tire rubber. and put into operation continuously in Zhejiang University to investigate the large scale pyrolysis plant with a capacity of 5,000,ton/year will be designed in the near future. . by screw machine from bottom of the reactor continuously.
Waste tires pyrolysis is well known method for their thermal recycling by . productivity and quality of carbon black because of low operating conditions as for . Design overview of the ENRESTEC plant: 1,2 – both furnaces with oil fuel .. PYROLYSIS MACHINE FOR SCRAP TIRE CONTINUOUS RECYCLING (APS -500).
Beston waste tyre pyrolysis plant is designed to turn the waste tyres into oil, operating plant, BLJ-16 semi-continuous machine and BLL-20 continuous plant. Here we list the continuous tyre pyrolysis process, and you may understand . to process the waste tyres into small pieces, whose size should be under 50 mm. 2.
Oct 31, 2018 Waste tire pyrolysis plant, a kind of automatic oil refining equipment, under the anaerobic, normal pressure and airtight conditions. our equipment can achieve fully automatic continuous production at a high temperature. Fully automatic production, low labor intensity and long period stable operation.
Manufacturer s continuous waste tire pyrolysis plant are:.