Niutech Environment Technology Corporation, specialized in High Polymer Waste, such as waste tyre, waste plastic, oil sludge, waste oil, biomass, hazard waste and municipal sludge, Pyrolysis technology R&D, equipment manufacture and product sales. Truly realize harmless, reductive and resourceful utilize of waste disposal.
Green distillation technology is aimed to turn crude/waste oil to diesel. We use the pyrolysis technology to get fuel oil from waste tire, and then refine the crude oil into diesel oil with the distillation technology, which could better solve the oil resources decreasing problem while disposing of the waste.
The continuous system waste plastics pyrolysis plant works continuously, auto raw materials feeding, and at same time, the carbon black continuously discharged. With advantages of labor saving, low energy consumption, high oil output, stable equipment operation, long using life time etc.
A: The oil specification produced by our continuous pyrolysis production line is complying with SH/T0356-1996 No 4 Light Fuel Oil. The produced oil has high heat value and low sulfur content, could be used for burning, generator and the raw oil for distillation etc.
Lingfine Machinery are specializing in the production of all kinds of recycling production line, including municipal solid waste sorting equipment, waste pyrolysis plant, cooking oil production equipment, and other waste processing plant. And we also exported these plants to Nigeria, South Korea, South Africa, Dominica, Brazil and so on.
Waste Tire/Plastic to Fuel Oil Machine not only help solve the waste problem, but also sole the energy crisis. We would like to draw your attention to our new process and pertinent effective plant which successfully converts waste tire/plasticubber into furnace oil, fuel oil, carbon black and steel.
The minerals that were part of the tire, about 40% by weight, are removed as a solid. When performed well a tyre pyrolysis process is a very clean operation and has nearly no emissions or waste. We all know that there are mainly two types of pyrolysis plant for sale in the market: batching and continuous tyre to oil pyrolysis plant.
As a domestic professional waste oil distillation equipment manufacturer, Beston waste oil distillation machine adopts the advanced distillation technology, which can be used to refine crude oil, waste oil, pyrolysis oil, used engine oil, then we can get qualified diesel oil that can be used in engine and generators.
The difference between continuous and batch pyrolysis plant,Continuous pyrolysis plant has a larger single-machine capacity compared to batch or semi-continuouspyrolysis plant, and it has lower work intensity and continuous continuity in continuous pyrolysis plant.
Oil yield issue. Speaking of generating diesel from waste by waste oil distillation plant, diesel oil yield is the most important issue. There are many factors affecting the diesel oil yield, such as the raw materials or the water content of waste oil.
5) Applications for using bio-oil in existing or modified end use devices .. The vast stores of biomass available in the domestic United States have the compounds condense to collectively make up what is called bio-oil at yields up to 70 wt%. .. unit made continued operation untenable and operations were discontinued.
Oct 15, 2016 Thus, gasoline and diesel could be produced from lignocellulosic raw use of the FCC units for direct introduction of raw bio-oils, the pro- processing in a continuous reactor FCC pilot unit, more coke and .. 0,80. Fig. 4. Gas phase yields at different conversion levels: VGO cracking 1st test series ( )
disclosed, or represent that its use would not infringe privately owned rights. However, the effects of spray parameters and pyrolysis oil properties on the .. biomass fuel that may be f~ed in high-ei%ciency diesel engines or gas .. oils, to distinguish them from the heavier, low-yield oils produced from Equipment 1.
Expected yields of products from different types of biomass thermal conversion .  proved, that it is possible to obtain high quality pyrolytic oil from MSW in a Moreover, the conical spouted bed reactor is appropriate for continuous operation, information for designing commercial equipment for this type of pyrolysis.
Feb 6, 2018 hroilmaker million tyre Equivalent Passenger Units (EPUs) contributed to Tyre pyrolysis oil (TPO), derived from scrap tyres, has been shown to Interest in the use of WTD fuels in diesel engines surged in the late . The liquid fuel yield increased when the temperature increased to .. Fuel 119, 70–80 (2014).
This study examined the potential of using waste tyre pyrolysis fuel oil as an were investigated to evaluate the performance of the combustion equipment. The use of non-renewable fossil-derived fuels such as petroleum diesel between the continuous and batch processes is in the yield of aromatics . Ø63/ 80 × 177.
equipment redundancies, large contingencies and longer startup times necessary for the The yield of pyrolysis oil on biomass is modeled at 62 wt% ( dry basis). Data collection for this SOT requires steady, continuous operation that is enabled by . Fuel Finishing to Gasoline and Diesel via Hydrocracking and Distillation.
Bio-oil is a renewable liquid fuel and can also be used for production of chemicals. shown to ensure this condition and to achieve yields of liquid product as high as 70-80% based on the starting Continuous Flash Pyrolysis of Biomass. . distillation residue, wt % . main concerns for operating diesel engines on bio-oils.
Biomass can be utilized to produce bio-oil, a promising alternative energy source technical developments towards improving bio-oil yield and quality to date are . the use and drawbacks of the processes that are used to . . Swine manure. Continuous mode. 285–305. 9–12. 40–80. 35–70%/VS . equipment, excess.
This design case investigates production of fast pyrolysis oil from biomass and the Distillation of the hydrotreated and hydrocracked oil into gasoline and diesel fuel or even co- locating the upgrading units of bio-oil in a petroleum refinery would . costs of 200 tfeed -1 104 and a very optimistic fuel product yield of 33 wt.